(630) 365-6600

Model 1619 Turret Reel Frames

Turret frames can be incorporated into existing equipment like flatbeds and trailers or as original equipment built into your new vehicles.

Specifications

Drawings

Capacity

72″Dia x 56″W Reel, 8000 lbs.
Shipping Weight 1300 lbs.

Shipping Weight

1619 – 1150 lbs.
1619-K – 926 lbs.

Construction

Base: 3″x5″x.250″ & 3″x3″x.250″ Tubing

Uprights: 3″x4″x.188″ Tubing

Finish

Base (1619-K Only): Painted Gray

Frame & 1619 Base: Hot-dip Galvanized

Turret

Continuous rotation, low profile turntable bearing w/ hardened external 20-degree gear teeth. 105,000 lbs Axial and 19,000 ft-lbs moment load capacity. Positioned by precision machine MG-Bronze wedge-lock slide on 6-degree intervals via stainless steel linkage actuation system. 3″ x 4″ Tubular self-supporting and removable, galvanized A-frames fastened with (16) grade-8 bolts to turntable outer race. Frame equipped with (4) lifting hooks.

Tensioning Brake

Hardware

16″ Ventilated 415B Aluminum-Bronze disc w/ stainless steel and Almag mechanical tensioning adjustment assembly. Adjustment wheel equipped w/ fine threads. 3000 ft-lbs torque delivered by self-moderating rubber insert bushing (U.S. Patent # 4,325,552). Disc/hub machined from one casting to ensure exact alignment. 5/16″ Diameter chamfered clean out holes provided in radial pattern along both sides of disc. MG-Bronze bolt-together housing w/ free-axis MG-Bronze caliper and stainless steel pivot pins. RF-38 Non-asbestos brake material w/ 48 sq-in combined pad area. Knurled pad holder surface to maximize coefficient of friction between pad and holder casting.

Reel Bar

2 1/4″ 8000 lbs galvanized reel bar w/ AL-Bronze positioning collar w/ lifting hook. Cast steel power arm w/ lifting hook disengages from brake w/o disturbing tension setting. Dove-tail connection between brake and reel bar w/ MG-Bronze reel bar saddles. Self-retaining bronze latch pin (U.S. Patent # 5,228,656) locks reel bar in saddle.

Performance

Capable of tensioning 5000′ of wire at full braking torque up to 18 RPM. Operating ambient temperature range of -20 to +105 degrees Fahrenheit Rotor and pad surface to withstand temperatures up to 525 degrees Fahrenheit. Average pad life at 50% of maximum torque and speed is 4500 revolutions – approximately 10 miles w/ 48″ diameter reel.

Warranty

10 Year Structural, Parts & Labor on all Sauber Manufactured components. 3 Year total Parts & Labor Coverage. Ten year non-prorated replacement warranty on turret bearing. All warranty support will be provided directly from Sauber Mfg. Co. w/ Customer Labor Reimbursement @ $65/hour.

Productivity Options

Model 1000 Take-Up/ Retriever

1300 ft-lbs torque @ 1500 PSI. Full feathering, bi-directional valve provides 18 RPM @ 8 GPM. Single lever MG-Bronze hub disengagement from braking unit when not required. Nothing to disassemble. Holds line tension and dumps to tank in neutral. Reel bar extension provided for attaching Capstan Coupler. MG-Bronze motor housing and Almag chain cover. 55 lbs.

Model 1000-T Turbo Retriever

2600 ft-lbs torque @ 2250 PSI. Full feathering, bi-directional valve provides 17 RPM @ 8 GPM. Single lever MG-Bronze hub disengagement from braking unit when not required. Nothing to disassemble. Holds line tension and dumps to tank in neutral. Reel bar extension provided for attaching Capstan Coupler. MG-Bronze motor housing and Almag chain cover. 71 lbs.

Model 1000-2S 2-Speed Retriever

2600 ft-lbs torque @ 17 RPM and 1300 ft-lbs torque @ 34 RPM – 2250 PSI/8 GPM input. Manual speed/torque control actuation. Single lever MG-Bronze hub disengagement from braking unit when not required. Nothing to disassemble. Holds line tension and dumps to tank in neutral. Reel bar extension provided for attaching Capstan Coupler. MG-Bronze motor housing and Almag chain cover. 80 lbs.

Almag Capstan

Model 8102 General Purpose capstan w/ stainless steel spring. 7 1/4″ Diameter w/ 5000 lbs cap – 21 lbs.