2600 ft-lbs torque @ 2250 PSI. Full feathering, bi-directional valve provides 17 RPM @ 8 GPM. Single lever MG-Bronze hub disengagement from braking unit when not required. Nothing to disassemble. Holds line tension and dumps to tank in neutral. Reel bar extension provided for attaching Capstan Coupler. MG-Bronze motor housing and Almag chain cover. 71 lbs.
Specifications
Model 1000-T Turbo Retriever
2600 ft-lbs torque @ 2250 PSI. Full feathering, bi-directional valve provides 17 RPM @ 8 GPM. Single lever MG-Bronze hub disengagement from braking unit when not required. Nothing to disassemble. Holds line tension and dumps to tank in neutral. Reel bar extension provided for attaching Capstan Coupler. MG-Bronze motor housing and Almag chain cover. 71 lbs.
Model 1000-2S 2-Speed Retriever
2600 ft-lbs torque @ 17 RPM and 1300 ft-lbs torque @ 34 RPM – 2250 PSI/8 GPM input. Manual speed/torque control actuation. Single lever MG-Bronze hub disengagement from braking unit when not required. Nothing to disassemble. Holds line tension and dumps to tank in neutral. Reel bar extension provided for attaching Capstan Coupler. MG-Bronze motor housing and Almag chain cover. 80 lbs.
Flow Divider
Hydraulic 3-section flow divider provides division of three equal flows at full system pressure. All Retrievers can be run simultaneously and independently without affecting speed or pressure to other units. Maximum section pressure differential is 1000 PSI. Maximum speed of each retriever is based on one-third total flow output of hydraulic power source.
Multi-Reel Applications
One unit installed each location. Full feathering, bi-directional, centralized valves provide available speed and torque to any single retriever.
Capstan Coupler
Model 8230 coupler attaches to reel bar via quick pin and provides a standard 2 7/16″ bayonet shaft allowing the use of all standard capstans and take-up reels – 21 lbs.
Almag Capstan
Model 8102 General Purpose capstan w/ stainless steel spring. 7 1/4″ Diameter w/ 5000 lbs cap – 21 lbs.
