Gallery
EZ-Up Jack
General note: Jack shown here is 17754 – 10k EZ-Up Jack complete with caster. If no caster is required, complete assembly is 17189 – 10k EZ-Up Jack with Sandshoe. Items 5, 6, 9, 7, 8 would not be required. Installation instructions on images. View PDF.
| Item No. | Part Number | Description | QTY. |
|---|---|---|---|
| 1 | 10489 | Bronze Swivel w/ Fasteners (ref. 7128ST) | 1 |
| 2 | 15562 | 10K Jack w/ Swivel Shank & 10" Drop Leg, Painted, With Swivel. | 1 |
| 3 | 10483 | Handle w/ Set Screws (ref. 2296ST) | 1 |
| 4 | 15611 | 5/16"x1 3/4" HD SST Coil Spring Pin | 1 |
| 5 | 10421 | 8" X 2" Swivel Caster | 1 |
| 6 | 15012 | 12" SAE High Strength Flat Washer | 4 |
| 7 | 13136 | 1/2" Bevel Washer Steel / Galv | 4 |
| 8 | 11047 | 1/2-13 X 2 Hex HD GR8 YZ | 4 |
| 9 | 15060 | 1/2-13 Hex Nut 18-8 | 4 |
15562 BOM Table
| Item No. | Part Number | Description | Default/QTY. |
|---|---|---|---|
| 1 | 15620 | 10K lb Jack, Drop Leg | 1 |
| 2 | 10476 | Round Swivel Shank Weldment | 1 |
| 3 | 15489 | 8K & 10K Jack Handle Clip | 1 |
10489 BOM Table
| Item No. | Part Number | Description | QTY. |
|---|---|---|---|
| 1 | 17045 | EZ-UP Jack Swivel Base - Machined | 1 |
| 2 | 10549 | Flat Washer 3/8" - 18-8 | 8 |
| 3 | 10751 | 3/8-16 X 2 Hex HD 18-8 | 4 |
| 4 | 10575 | 3/8"-16 Nylon Insert L-Nut 18-8 | 4 |
10483 BOM Table
| Item No. | Part Number | Description | QTY. |
|---|---|---|---|
| 1 | 11950 | EZ-UP JACK HANDLE CASTING | 1 |
| 2 | 10972 | 1/4-20x1/2 Socket Set Screw - 18-8 | 2 |
