Specifications

Construction

4″ x 6″ Bent tubing mainframe with tubing cross stringers and longitudinal reinforcement tongue area.

Storage

Heavy duty #3 expanded metal lined towing area.

Fenders

10-gauge smooth steel with 1″ lip return and mud flaps. Heavy duty #4 expanded metal catwalks at front and rear undercarriage.

Registration

High-impact resistant Xenoy construction provides protection from UV and weather-related degradation. Includes gasket, water shield & poly bag.

Chocks

(2) Galvanized All Weather # 8500 w/ gripstrut design and bolt-on, cast chock-holders.

Fasteners

Bolts under ½”: Stainless steel; ½” and Above: Zinc-plated Grade 8; lock nuts used exclusively.

Stabilizers

(2) adjustable almag telescoping outriggers with cast-bronze bolt-on housing.

Front Jack (Model# 17189)

Model# 17189 EZ-Up side-winding jack with sandshoe. Heavy-duty cast-bronze swivel, 20″ drop leg range, 10″ crank travel, 10,000 lbs capacity.

Galvanized Pintle Eye and Hitch Extension

A galvanized 3” I.D., 60,000 lbs-capacity pintle eye is attached to our 11″ reversible hitch extension, which is adjustable to 6 different positions to properly match your towing vehicles. Our industry-leading hitch extension is made from hot-dipped galvanized cast-steel. Both the pintle eye and hitch extension are installed with grade-8 fasteners.

3/8” Safety Chain

Zinc-plated, grade-70 3/8” chain rated at 26,400 lbs breaking strength extends 23” beyond pintle eye. Zinc-plated, grade-70 clevis hook with safety latch rated at 26,400 lbs breaking strength. Assembly connected via 3”x3”x3/8” wall tubing continuously welded to trailer frame with inverted crucifix and 3/4”-10 grade-8 fastener with SAE high-strength washer and lock nut securing chain in crucifix.

Turret

Continuous rotation, low-profile turntable bearing with hardened external 20-degree gear teeth. 105,000 lbs Axial and 19,000 ft-lbs moment load capacity. Positioned by precision-machined cast-bronze wedge-lock slide on 6-degree intervals via stainless steel linkage actuation system. 3″ x 4″ Tubular self-supporting and removable, galvanized A-frames fastened with (16) grade-8 bolts to turntable outer race. Frame equipped with (4) lifting hooks. Remotely-mounted turntable bearing grease-point provided.

Tensioning Brakes

Hardware

16″ ventilated cast-bronze disc with stainless steel and almag mechanical tensioning adjustment assembly. Adjustment wheel equipped with fine threads. 3000 ft-lbs torque delivered by self-moderating rubber insert bushing (U.S. Patent # 4,325,552). Disc/hub machined from one casting to ensure exact alignment. 5/16″ Diameter chamfered clean out holes provided in radial pattern along both sides of disc. Cast bronze bolt-together housing with free-axis cast-bronze caliper and stainless steel pivot pins. RF-38 Non-asbestos brake material w/ 48 sq-in combined pad area. Knurled pad holder surface to maximize coefficient of friction between pad and holder casting.

ENGAGEMENT

Bronze slide engagement/disengagement allows reel to be loaded and unloaded without connection to braking unit. Over center cam-type handle provides easy actuation method.

REEL BAR

2-1/4″ 8000 lbs galvanized reel bar w cast-bronze positioning collar with lifting hook. Cast-steel power arm with lifting hook disengages from brake without disturbing tension setting. Dovetail connection between brake and reel bar with cast-bronze reel bar saddles. Self-retaining bronze latch pin (U.S. Patent # 5,228,656) locks reel bar in saddle.

PERFORMANCE

Capable of tensioning 5000′ of wire at full braking torque up to 18 RPM. Operating ambient temperature range of -20 to +105 °F, rotor and pad surface to withstand temperatures up to 525 °F. Average pad life at 50% of maximum torque and speed is 4500 revolutions, or approximately 10 miles w/ 48″ diameter reel.

LED Lighting & Electrical

LED sealed beam wiring system with stop / turn/ tail lights recessed in a structural tubing bumper to meet FMVSS 108 ensure long life of these signaling lights.  Automotive-grade wiring harness features SAE bullet-style connectors at each light, ensure easy replaceability of individual lights.  SAE 7-way socket protected top sides and back with almag housing.  Sealed breakaway with charging circuit and LED battery condition indicator with 450 C.C.A. maintenance-free battery.  Recessed ABS license plate housing with integrated lamp provide very high protection of both the license plate and its illumination.

Wheel Nut Indicators

Our wheel nuts are torqued to manufacturer specifications, and are then fitted with high-visibility wheel nut indicators. The indicators are fitted in a uniform pattern, so when a wheel nut has loosened, the indicator will become out of sequence. The wheel nut indicators are also heat sensitive. If there is a binding brake or seized bearing, the heat is transferred through the stud and nut. If this temperature exceeds 120º C (248º F), the indicator will start to blister around the circumference and eventually start to distort. Pre-flight walkaround checks now can include wheel nut checks.

Solar Power

We include our Model 8854 Solar System with a single solar panel with 4.3W of charging as standard equipment on all trailers we manufacture that utilize electric brakes or are equipped with an electric start Hydraulic Power Source. We have made this improvement to reduce customer maintenance costs, increase “up time” in field operations and provide the highest assurance to your users and community that the system will work as designed in the event the of a breakaway.

Controls

3-Section stack valve to control outriggers and loading cylinder. Built-in flow control assures appropriate operating speed for each function. Retriever options upgrades the value to 4 sections.

Grounding Lug

5/8″ x 5″ bronze lug cast for conductivity bolted to frame with bronze fasteners.

Galvanized Finish

Hot-dip galvanize entire trailer including galvanized wheel rims. Undercarriage and all non-galvanized attachments grit blasted, primed and painted before assembly on trailer and installed w/ serviceable fasteners only. 10-year galvanized finish warranty.

Warranty

Model# 1010-H Honda Power Source

ENGINE

Honda 13 HP overhead valve, air-cooled, 4-stroke power plant with electronic ignition, low oil shutdown, gravity fuel system and automatic decompression.

PHYSICAL

22″W x 30″L x 26″H – 340 lbs wet.

STARTING

Electric start with built-in 3A charging circuit. Recoil start included.

CONTROLS

Throttle control with choke. Adjustable system pressure relief, preset to 1500 or 2250 PSI depending on pump choice selected. Engine key switch labeled “Stop-Run-Start”. Two keys supplied.

PANEL

One-piece polymer panel with engraved control indicators.

FASTENERS

Stainless steel fasteners used exclusively.

FUEL TANK

Integral 2.2 quart poly tank provides 6.6 HP-Hours of use.

PUMP CHOICES

Vertical mount pump with jaw-type coupling and shock absorbing rubber insert. 43 cu-in displacement: 2250 PSI @ 6 GPM

FILTRATION

Heavy-duty spin on type 10 micron hydraulic oil filter. Tank suction strainer. Oil fill cap breather.

GAUGES

Oil level, temperature, and pressure gauges. Hydraulic oil filter back pressure gauge with green/yellow/red service indicator. 12VDC hour meter with panel lite.

TANK

18 Gallon aluminum treadplate reservoir with Almag lid. #32 Anti-Wear premium hydraulic oil included.

CONNECTION

Pressure and return lines routed with stainless steel tube to right front of power source panel. Dripless quick couples provided at pressure and return outlets.

COVER

Vinyl weatherproof cover included.

WARRANTY

One year full parts coverage.

Drawings

Solid model engineering drawings submitted with bid must include trailer detail and will be approved prior to production. Bids submitted without solid model drawings cannot be evaluated. 

Productivity Options

Capstan Coupler

Model 8230 coupler attaches to reel bar via quick pin and provides a standard 2 7/16″ bayonet shaft allowing the use of all standard capstans and take-up reels – 21 lbs.

Almag Capstan

Model 8102 General Purpose capstan w/ stainless steel spring. 7 1/4″ Diameter w/ 5000 lbs cap – 21 lbs.

Take-Up / Retriever

1300 ft-lbs torque @ 1500 PSI. Full feathering, bi-directional valve provides 18 RPM @ 8 GPM. Single lever MG-Bronze hub disengagement from braking unit when not required. Nothing to disassemble. Holds line tension and dumps to tank in neutral. Reel bar extension provided for attaching Capstan Coupler. MG-Bronze motor housing and Almag chain cover.

Turret Retriever Option

Continuous-rotation on turret frames equipped with Take-up/Retrievers allow unrestricted rotation with hydraulic hoses routed underdeck for hose free walk areas. Eliminates the need to connect and disconnect hydraulic hoses. Available with centralized valve bank for multi-turret applications or in combination with valves located on the brake/retriever assembly.

Gallery